KONTUR 700 TP
MATERIAL:Thermoplastic
DESCRIPTION
Kontur 700ТP is designed for applying thick-layer horizontal road markings onto asphalt concrete and cement concrete roads using thermoplastics and retroreflective glass beads.
The marking unit allows application of 5 to 50 cm wide lines in various combinations. The extruder in the standard configuration is equipped with eight valves 5 cm wide. Optionally, the width and number of valves can be different. The valve opening control system allows applying solid lines and rumble strips as well as lines with systematic profiles and patterns.
The hydraulic travel drive ensures smooth machine speed regulation during marking. The automatic oil burner regulation system ensures that the thermoplastic temperature setting is maintained in the desired range. All mechanisms are controlled directly from the operator seat.
The extruder, the sweeper, and the operator seat can be installed on either side of the machine: left or right. The machine applying capacity is about 2,000 m2/day.
The machine must be transported to the site on a low-frame trailer with a load capacity of at least 5 tons.
Standard Configuration:
- 50 cm line marking unit, flat lines;
- Two glass bead guns;
- Marking control panel;
- Foot pedal duplicating the “Start” button on the marking control panel;
- Hydraulic agitator in the plastic tank;
- Roof-mounted flashing lights;
- Spotlight for the marking unit;
- “Pass This Side” sign (700 mm) on a swivel bracket;
- Hydraulic powered sweeper.
Options:
- DL marking unit for flat and structured lines up to 500 mm wide (10 x 50 mm);
- Draining chute for draining thermoplastic from the tank;
- Remote button duplicating the “Start” button on the marking control panel.
The marking unit allows application of 5 to 50 cm wide lines in various combinations. The extruder in the standard configuration is equipped with eight valves 5 cm wide. Optionally, the width and number of valves can be different. The valve opening control system allows applying solid lines and rumble strips as well as lines with systematic profiles and patterns.
The hydraulic travel drive ensures smooth machine speed regulation during marking. The automatic oil burner regulation system ensures that the thermoplastic temperature setting is maintained in the desired range. All mechanisms are controlled directly from the operator seat.
The extruder, the sweeper, and the operator seat can be installed on either side of the machine: left or right. The machine applying capacity is about 2,000 m2/day.
The machine must be transported to the site on a low-frame trailer with a load capacity of at least 5 tons.
Standard Configuration:
- 50 cm line marking unit, flat lines;
- Two glass bead guns;
- Marking control panel;
- Foot pedal duplicating the “Start” button on the marking control panel;
- Hydraulic agitator in the plastic tank;
- Roof-mounted flashing lights;
- Spotlight for the marking unit;
- “Pass This Side” sign (700 mm) on a swivel bracket;
- Hydraulic powered sweeper.
Options:
- DL marking unit for flat and structured lines up to 500 mm wide (10 x 50 mm);
- Draining chute for draining thermoplastic from the tank;
- Remote button duplicating the “Start” button on the marking control panel.
SPECIFICATION
Specification | Kontur 700 TP |
Engine type | Diesel |
Engine power output, kW | 63 |
Engine power, HP | 85 |
Engine capacity, cm3 | 3600 |
Approval | EU Stage IIIA (TIER 3) |
Compressor | Piston |
Optional compressor*** | - |
Maximum operating road gradient, % | 20 |
Maximum gradeability, % | 30 |
Transport speed, km/h | 12 |
Glass bead tank , l | 120 |
Glass bead tank, kg | 190 |
Control panel screen diagonal, inches | 5,7 |
Pre-set programs | Up to 24 |
Marking material (main / optional) | Thermoplastics |
Maximum marking speed, km/h (with main / optional material) | 5 |
Marking material quantity, kg | 700 |
Hardener, l | - |
Flushing liquid, l | - |
Fuel tank capacity, l | 90 |
Oil tank capacity, l | 115 |
Second marking material quantity, kg | - |
Lines applied simultaneously | 2 |
Number of guns (applicators, extruders) | 2 |
Double line width, mm | Up to 150 |
Single line width, mm | Up to 500, in multiples of 50 |
Overall machine dimensions (L x W x H), m: | |
- Operating position | 8,000 x 2,300 x 2,700 |
- Transport position | 5,500 x 2,300 x 2,400 |
Dry weight, kg | 3200 |
Unladen weight, kg | 3400 |
Total weight, kg | 4300 |
* EU Stage V upon request
** Upon request, gradeability can be up to 25%
*** Optional equipment, to be specified when ordering
CERTIFICATES