Kontur 90HP is designed for applying thick-layer horizontal road markings with innovative one-component cold plastics and retroreflective glass beads.
The machine can apply flat and structured lines.
Kontur 90HP is a walk-behind type of machine. The hydraulic travel drive ensures infinitely variable travel speed.
The marking unit is equipped with quick-release structured line applicators. Flat segment-and-gap lines are applied using a screed-box system. Cold plastic is mixed with hardener in the dynamic agitator immediately before applying marking lines. Hardener is dispensed automatically.
Plastic consumption depends on the marking type and structured line pattern and ranges from
1.5 to 6 kg/m2. The marking unit with an applicator and a glass bead gun is mounted on the right side of the machine.
Cleaning of the agitator and the applicator is controlled from the operator panel and requires minimal attention from the support workers.
Retroreflective glass beads are applied on the line directly during marking with an automatic glass bead gun through an adjustable diffuser.
Standard Configuration: - Flat line marking unit, 1 pc. (Screed box size to be specified when ordering);
- Structured line marking unit, 1 pc. (Applicator size to be specified when ordering);
- Automatic glass bead gun;
- M21 marking control panel;
- Auxiliary machine control panel;
- Main component tank with a manual agitator;
- Hardener tank;
- Flushing liquid tank;
- Pneumatic and electric controls;
- Telescopic aiming device.
Options: - Marking unit spotlight;
- Flashing light on a retractable rod;
- Screed boxes for flat lines and applicators for structured lines 10 to 25 cm wide.
Engine power output, kW
Engine power, HP
Engine capacity, cm3
Maximum operating road gradient, %
Maximum gradeability, %
Transport speed, km/h
Glass bead tank , l
Glass bead tank, kg
Control panel screen diagonal, inches
Up to 7
Marking material (main / optional)
Maximum marking speed, km/h (with main / optional material)
Marking material quantity, kg
Flushing liquid, l
Fuel tank capacity, l
Oil tank capacity, l
Second marking material quantity, kg
Lines applied simultaneously
Number of guns (applicators, extruders)
Double line width, mm
Single line width, mm
100, 120, 150, 200, 240
Overall machine dimensions (L x W x H), m:
- Operating position
3,500 x 1,200 x 1,200
- Transport position
2,000 x 1,200 x 1,200
Dry weight, kg
Unladen weight, kg
Total weight, kg
* EU Stage V upon request
** Upon request, gradeability can be up to 25%
*** Optional equipment, to be specified when ordering